Teleporter

BoxStationDeltaStationMetaStationOmegaStationPubbyStation

Teleporter Room
The teleporter sounds cooler than it really is.
Purpose:	To facilitate teleportation.
Key items:	The teleporter, a Hand Teleporter, Shield Generators
Workers:	None
Access:	Captain, Research Director
Exits:	Captain's Quarters north, Central Primary Hallway east, the teleporter
Command

Located in the Bridge, south of the Captains Quarters, the Teleporter houses one of the two Hand Teleporters on the station. It also provides a back door into the Captains Quarters and any location with a Tracking Beacon. The teleporter room stores some Shield Generators (ID-locked to Teleporter), for whatever purpose you can think of. Shield generation would be a good place to start.

This is a secure area, and only the Captain and Research Director are authorized to enter. In practice it is pretty much broken into every round, whether by traitors looking to steal the Hand Teleporter or chucklefucks trying to backdoor into the Captain's Quarters.

Using the Teleporter

The teleporter can be confusing at first, but is actually very simple to use.

The teleporter comes in three parts: The control console, the teleporter station, and the teleporter hub.

Understanding the Teleporter interface

Begin by using the control console. It will bring up the same window as the one shown above (if no-one has used it yet).

At the top you will see three pieces of status information:

• Current regime
• Current target
• Calibration

Underneath that you will see three buttons:

• Change regime
• Set target
• Calibrate Hub

Regime is the current location of the teleporter that you are using.
Target is the beacon that the teleporter will send you to when you step into the teleporter hub.
Calibration is whether the teleporter is calibrated correctly. There will be further information below on this.

Tracking Beacons

To set up the teleporter, you will require a beacon in the desired location. These beacons are automatically detected by the teleporter.

At the start of the shift, the following Tracking Beacons are available:

• Arrivals
• Atmospherics
• Bridge
• Courtroom
• Teleporter
• Testing Lab
• Toxins Test Chamber

To choose a target destination, select Set target and choose a tracking beacon from the list that will appear. You will notice the Current target has changed on the status screen.

Calibration

Unless you calibrate the teleporter, or science actually upgrades it for once, it has a chance of malfunctioning. A malfunctioning teleporter will turn you into a fly person during the teleport. Gross!

To calibrate the teleporter, press Calibrate Hub. You will see the status screen say it is calibrating (shown by yellow text). After a while the status screen will say it is calibrated (shown by green text). Calibrated teleporters will never turn you into a fly person.

Time to Teleport

Once you have set a target and calibrated the teleporter, it is time to do the teleporting. Double check before you proceed that the Current target is set correctly and the Calibration is done. Once you have checked and it is all fine, press the teleporter station to activate the hub. Then walk into the hub and you will find yourself magically at the new destination.

Teleporter Room
The teleporter sounds cooler than it really is.
Purpose:	To facilitate teleportation.
Key items:	The teleporter, a Hand Teleporter, Shield Generators
Workers:	None
Access:	Captain, Research Director
Exits:	Captain's Quarters north, Central Primary Hallway east, the teleporter
Command

Located in the Bridge, south of the Captains Quarters, the Teleporter houses one of the two Hand Teleporters on the station. It also provides a back door into the Captains Quarters and any location with a Tracking Beacon. The teleporter room stores some Shield Generators (ID-locked to Teleporter), for whatever purpose you can think of. Shield generation would be a good place to start.

This is a secure area, and only the Captain and Research Director are authorized to enter. In practice it is pretty much broken into every round, whether by traitors looking to steal the Hand Teleporter or chucklefucks trying to backdoor into the Captain's Quarters. The teleporter room contains shutters behind the teleporter hub for public access.

Using the Teleporter

The teleporter can be confusing at first, but is actually very simple to use.

The teleporter comes in three parts: The control console, the teleporter station, and the teleporter hub.

Understanding the Teleporter interface

Begin by using the control console. It will bring up the same window as the one shown above (if no-one has used it yet).

At the top you will see three pieces of status information:

• Current regime
• Current target
• Calibration

Underneath that you will see three buttons:

• Change regime
• Set target
• Calibrate Hub

Regime is the current location of the teleporter that you are using.
Target is the beacon that the teleporter will send you to when you step into the teleporter hub.
Calibration is whether the teleporter is calibrated correctly. There will be further information below on this.

Tracking Beacons

To set up the teleporter, you will require a beacon in the desired location. These beacons are automatically detected by the teleporter.

At the start of the shift, the following Tracking Beacons are available:

• AI Satellite
• Arrivals
• Bridge
• Command hallway
• Courtroom
• Engineering entrance
• Escape
• E.V.A.
• Medbay
• Research Division
• Starboard Primary hallway (outside Brig)
• Testing Lab
• Toxins Test Chamber

To choose a target destination, select Set target and choose a tracking beacon from the list that will appear. You will notice the Current target has changed on the status screen.

Calibration

Unless you calibrate the teleporter, or science actually upgrades it for once, it has a chance of malfunctioning. A malfunctioning teleporter will turn you into a fly person during the teleport. Gross!

To calibrate the teleporter, press Calibrate Hub. You will see the status screen say it is calibrating (shown by yellow text). After a while the status screen will say it is calibrated (shown by green text). Calibrated teleporters will never turn you into a fly person.

Time to Teleport

Once you have set a target and calibrated the teleporter, it is time to do the teleporting. Double check before you proceed that the Current target is set correctly and the Calibration is done. Once you have checked and it is all fine, press the teleporter station to activate the hub. Then walk into the hub and you will find yourself magically at the new destination.

Teleporter Room
The teleporter sounds cooler than it really is.
Purpose:	To facilitate teleportation.
Key items:	The teleporter, a Hand Teleporter, Shield Generators
Workers:	None
Access:	Captain, Research Director
Exits:	Command Hallway north, Central Primary Hallway south, the teleporter
Command

Located in the Bridge, south of the Head of Personnel's Office, the Teleporter houses one of the two Hand Teleporters on the station. It also provides a back door into any location with a Tracking Beacon. The teleporter room stores some Shield Generators (ID-locked to Teleporter), for whatever purpose you can think of. Shield generation would be a good place to start.

This is a secure area, and only the Captain and Research Director are authorized to enter. In practice it is pretty much broken into every round, whether by traitors looking to steal the Hand Teleporter or chucklefucks trying to backdoor into the Captain's Quarters. The teleporter room contains shutters on the south for public access.

Using the Teleporter

The teleporter can be confusing at first, but is actually very simple to use.

The teleporter comes in three parts: The control console, the teleporter station, and the teleporter hub.

Understanding the Teleporter interface

Begin by using the control console. It will bring up the same window as the one shown above (if no-one has used it yet).

At the top you will see three pieces of status information:

• Current regime
• Current target
• Calibration

Underneath that you will see three buttons:

• Change regime
• Set target
• Calibrate Hub

Regime is the current location of the teleporter that you are using.
Target is the beacon that the teleporter will send you to when you step into the teleporter hub.
Calibration is whether the teleporter is calibrated correctly. There will be further information below on this.

Tracking Beacons

To set up the teleporter, you will require a beacon in the desired location. These beacons are automatically detected by the teleporter.

At the start of the shift, the following Tracking Beacons are available:

• AI Satellite
• Arrivals
• Atmospherics
• Bridge
• Command Hallway
• Courtroom
• Escape
• Experimental Lab
• Fore Primary Hallway
• Starboard Primary Hallway
• Teleporter
• Toxins Test Chamber
• Xenobiology secure containment

To choose a target destination, select Set target and choose a tracking beacon from the list that will appear. You will notice the Current target has changed on the status screen.

Calibration

Unless you calibrate the teleporter, or science actually upgrades it for once, it has a chance of malfunctioning. A malfunctioning teleporter will turn you into a fly person during the teleport. Gross!

To calibrate the teleporter, press Calibrate Hub. You will see the status screen say it is calibrating (shown by yellow text). After a while the status screen will say it is calibrated (shown by green text). Calibrated teleporters will never turn you into a fly person.

Time to Teleport

Once you have set a target and calibrated the teleporter, it is time to do the teleporting. Double check before you proceed that the Current target is set correctly and the Calibration is done. Once you have checked and it is all fine, press the teleporter station to activate the hub. Then walk into the hub and you will find yourself magically at the new destination.

Teleporter Room
The teleporter sounds cooler than it really is.
Purpose:	To facilitate teleportation.
Key items:	The teleporter, a Hand Teleporter, Shield Generators
Workers:	None
Access:	Captain, Research Director
Exits:	Fore Primary Hallway north, the teleporter
Command

Located in the Bridge, south of the Head of Personnel's Office, the Teleporter houses one of the two Hand Teleporters on the station. It also provides a back door into any location with a Tracking Beacon. The teleporter room stores some Shield Generators (ID-locked to Teleporter), for whatever purpose you can think of. Shield generation would be a good place to start. There is a tank dispenser in the center of the room, which contains ten oxygen tanks and ten plasma tanks.

This is a secure area, and only the Captain and Research Director are authorized to enter. In practice it is pretty much broken into every round, whether by traitors looking to steal the Hand Teleporter or chucklefucks trying to backdoor into the Captain's Quarters. The teleporter room contains shutters on the south for public access.

Using the Teleporter

The teleporter can be confusing at first, but is actually very simple to use.

The teleporter comes in three parts: The control console, the teleporter station, and the teleporter hub.

Understanding the Teleporter interface

Begin by using the control console. It will bring up the same window as the one shown above (if no-one has used it yet).

At the top you will see three pieces of status information:

• Current regime
• Current target
• Calibration

Underneath that you will see three buttons:

• Change regime
• Set target
• Calibrate Hub

Regime is the current location of the teleporter that you are using.
Target is the beacon that the teleporter will send you to when you step into the teleporter hub.
Calibration is whether the teleporter is calibrated correctly. There will be further information below on this.

Tracking Beacons

To set up the teleporter, you will require a beacon in the desired location. These beacons are automatically detected by the teleporter.

At the start of the shift, the following Tracking Beacons are available:

• Aft Primary Hallway
• AI Satellite
• Arrivals
• Bridge
• Escape
• E.V.A.
• Teleporter

To choose a target destination, select Set target and choose a tracking beacon from the list that will appear. You will notice the Current target has changed on the status screen.

Calibration

Unless you calibrate the teleporter, or science actually upgrades it for once, it has a chance of malfunctioning. A malfunctioning teleporter will turn you into a fly person during the teleport. Gross!

To calibrate the teleporter, press Calibrate Hub. You will see the status screen say it is calibrating (shown by yellow text). After a while the status screen will say it is calibrated (shown by green text). Calibrated teleporters will never turn you into a fly person.

Time to Teleport

Once you have set a target and calibrated the teleporter, it is time to do the teleporting. Double check before you proceed that the Current target is set correctly and the Calibration is done. Once you have checked and it is all fine, press the teleporter station to activate the hub. Then walk into the hub and you will find yourself magically at the new destination.

Teleporter Room
link=File:Teleporter_pubby.png}}
The teleporter sounds cooler than it really is.
Purpose:	To facilitate teleportation.
Key items:	The teleporter, a Hand Teleporter
Workers:	None
Access:	Captain, Research Director
Exits:	Central Primary Hallway north and east, the teleporter
Command

Located in the Bridge, south of the Head of Personnel's Office, the Teleporter houses one of the two Hand Teleporters on the station. It also provides a back door into any location with a Tracking Beacon. The teleporter room stores some Shield Generators (ID-locked to Teleporter), for whatever purpose you can think of. Shield generation would be a good place to start.

This is a secure area, and only the Captain and Research Director are authorized to enter. In practice it is pretty much broken into every round, whether by traitors looking to steal the Hand Teleporter or chucklefucks trying to backdoor into the Captain's Quarters. The teleporter room contains shutters on the east for public access.

Using the Teleporter

The teleporter can be confusing at first, but is actually very simple to use.

The teleporter comes in three parts: The control console, the teleporter station, and the teleporter hub.

Understanding the Teleporter interface

Begin by using the control console. It will bring up the same window as the one shown above (if no-one has used it yet).

At the top you will see three pieces of status information:

• Current regime
• Current target
• Calibration

Underneath that you will see three buttons:

• Change regime
• Set target
• Calibrate Hub

Regime is the current location of the teleporter that you are using.
Target is the beacon that the teleporter will send you to when you step into the teleporter hub.
Calibration is whether the teleporter is calibrated correctly. There will be further information below on this.

Tracking Beacons

To set up the teleporter, you will require a beacon in the desired location. These beacons are automatically detected by the teleporter.

At the start of the shift, the following Tracking Beacons are available:

• AI Satellite
• Arrivals
• Atmospherics
• Bar
• Experimental Lab
• Experimentor Chamber
• Bomb Testing Asteroid
• Bridge
• Fore Primary Hallway
• Technical Storage
• Telecommunications control room
• Teleporter
• Xenobiology

To choose a target destination, select Set target and choose a tracking beacon from the list that will appear. You will notice the Current target has changed on the status screen.

Calibration

Unless you calibrate the teleporter, or science actually upgrades it for once, it has a chance of malfunctioning. A malfunctioning teleporter will turn you into a fly person during the teleport. Gross!

To calibrate the teleporter, press Calibrate Hub. You will see the status screen say it is calibrating (shown by yellow text). After a while the status screen will say it is calibrated (shown by green text). Calibrated teleporters will never turn you into a fly person.

Time to Teleport

Once you have set a target and calibrated the teleporter, it is time to do the teleporting. Double check before you proceed that the Current target is set correctly and the Calibration is done. Once you have checked and it is all fine, press the teleporter station to activate the hub. Then walk into the hub and you will find yourself magically at the new destination.

Locations on Yogstation
General	Recreational	Medical	Supply	Science	Engineering	Security	Command	Upkeep	Outside
Arrivals Arrivals Shuttle Artist's Coven Auxiliary Tool Storage Escape Pods Escape Shuttle Escape Shuttle Hallway Garden Podbay Primary Tool Storage	Bar Chapel Dormitory Gift Shop Holodeck Hydroponics Kitchen and Freezer Library Locker Room Theatre	Chemistry Lab Chief Medical Officer's Office Genetics Medbay Medbay Storage Morgue Operating Theatre Patient Room Psychiatrist's Office Virology	Auxiliary Base Cargo Bay Cargo Office Delivery Office Mining Dock Quartermaster's Office Supplies	Experimental Lab Nanites Lab Research and Development Lab Research Director's Office Research Division Robotics Lab Server Room Toxins Lab Toxins Test Chamber Testing Lab Xenobiology Lab	Atmospherics Chief Engineer's Office Construction Area Electrical Maintenance Engineering Gravity Generator Room Solars Technical Storage Telecommunications Vacant Office	Armory Brig Courtroom Detective's Office Interrogation Head of Security's Office Labor Camp Law Office Prison Wing Security Office Security Posts Warden's Office	AI Core AI Satellite AI Upload Bridge Captain's Quarters Conference Room E.V.A. Head of Personnel's Office Teleporter Vault	Custodial Closet Incinerator Maintenance Waste Disposal	Abandoned Satellite Central Command Derelict Lavaland Jungleland Mining Station Mining Medic's Office Old Station Space White Ship