Research Staff |
|
Difficulty |
Medium |
Age Restriction |
None |
Supervisors |
|
Access |
|
Duties |
|
You turn people into cyborgs, make mechas for departments when they request it, and make floor bots that are named such that people will look twice, and never appreciate. |
|
Guides |
|
So, fancy being a mad scientist do you?
Roboticists are genrally strange, you can see one drag a mutilated corpse around and think nothing of it... Here is a guide to being THAT GUY
Setting up shop
To start with, you should load your exosuit fabricators with metal and glass (found on the leftmost table), pick it up and click the fabricator and TA-DA!, now you can print...
Below is your workplace and the exosuit fabricators
What to make
At the start of the round It is recommended to set up at least one borg shell ( empty body ) and you may be asked to make syringe guns for R&D (note: don't forget to nag them for research)
Assembly
To make a borg, make sure you have:
The exoskeleton
Two flashes
Cable coil
All the borg parts
A battery
First attach the chest, to do this first, add wire and a battery then plop it on.
Then attach all the limbs
And finally Put two flashes into a head and boom!
Classifying borgs
When you have an empty shell which you want to name, simply use a mulltitool (the yellow thing) and click on the name button
To reclass an existing borg, unlock its cover with an ID of robotics or command, then crowbar, then print a reclassification board from your fabricators and shove it in, then recrowbar and lock with ID ((DO NOT FORGET, YOU MUST NAME THE BOARD BY CLICKING IT IN YOUR HAND!))
How do I cut people up?
The only surgerys you will need are
BRAIN SURGERY
(its not rocket science) Lay the patient/ Victim on the table (grab intent (yellow one) and then click table with a grab) Drape them and click BRAIN SURGERY from options Aim for the head (MAKE SURE YOUR INTENT IS SET TO GREEN,(help)) Scalpel/Shard of glass/kitchen knife Hemostat/wirecutters/cables Retractor/screwdriver/wirecutters Saw/hatchet(OH LORD) Hemostat grab brain from pile and place in mmi, then add mmi to a borg shell
AUGMENTATION SURGERY
(I didn't ask for this , Deus Ex guy-deus ex human revolution) Lay them down, (see above for details) Aim for desired limb,Drape and select Augmentation Scalpel Hemostat retractor scalpel saw This then pops their arm off, grab a cyborg version of the limb and shove it in (click patient) DONE!
UPGRADES
To upgrade a borg, open them and shove it in and close. (upgrades generally cost preciousness,so be nice to mining and make them a ripley)
ARMY OF BOTS
To make a desired bot, follow these steps
MEDIBOT
empty medkit out, shove a robotic arm on, grab a pen to name it something (optional) ,Proximity sensor and to finish it, add a health analyser
cleanbot
Steal a bucket off botany, name it soap slut with a pen (OPTIONAL) add a borg arm. Done
floorbot
Stick a floor tile on a toolbox, add a prox sensor, borg arm Beep boop
securitron
Beepsky's cousin!
Use a remote signaller on a Security helmet, weld, prox sensor,borg arm and a mighty stunbaton , boopsky is ready to stop crime (or get hacked)
ED-209
oh dear
These things are EVIL do not make one unless it is REALLY needed note: you can also replace armour and helm and taser with.. LASER TAG GEAR
Use metal on a endoskeleton (print one) , shove on some legs, weld the heap together,add helmet,prox sensor,wires, add taser and secure with screwdriver, Power cell . YOU HAVE 15 SECONDS TO COMPLY
MECHS
RIPLEY APLU
A miner's best friend (great gift for christmas)
Make all of the Ripley parts using the Exosuit Fabricator.
Make tools for her
Connect all parts
Wrench
Screwdriver
Wire
WIRECUTTERS
central control board (nag RD)
screwdrive
peripherals board
screwdriver
5 metals
wrench
Welder
5 plasteel
Wrench
Weld
add tools and you are done!,enjoy