Guide to construction

From Yogstation-13
Revision as of 09:26, 12 February 2014 by imported>Kingofkosmos (Fixes here and there, made deconstruction-titles bigger)
Jump to navigation Jump to search
Pen.png This page needs revising!

The following page is out of date and/or needs to be revised. If the page's guide needs revision, see here for an example.
The revision reason is: "Needs info added and made prettier!"
Marked by: "Unknown"



If you want to do a job, like Station Engineer, you need to know how to build and deconstruct stuff.

Basic Tools

Before you can begin any construction or deconstruction you need to gather a few useful tools.

These tools can be found in any blue Mechanical Toolbox on the station. They can also be made in an Autolathe or dispensed from a YouTool -vending machine.


Crowbar.png
Crowbar
Crowbar


Screwdriver tool.png
Screwdriver
Screwdriver


Welder.png
Welder
Welder


Wirecutters.png
Wirecutters
Wirecutters


Wrench.png
Wrench
Wrench

Materials

To build anything, you need materials.

Metal

Metal.png
Metal
Found in: Ready stacks in Engineering, Auxiliary Tool Storage, E.V.A., Robotics and Atmospherics.
Shaft Miners have the ability to smelt more from iron ore and Cargo can order more.
Used for: Constructing various things from supportive elements to decorations
Strategy: Hold in active hand and activate to start building
Description
List of things you can make with having Metal in your hand and activating it:

Things you can do with it in your hand:

  • Finish wall girders into walls.
  • Repair broken walls.
  • Add armor to turret frames.
  • Refill an Exosuit Fabricator, Autolathe or Protolathe.

How to produce Metal:

Smelt iron ore at the Mining furnace.

Glass and Reinforced Glass

Glass.png
Glass and Reinforced Glass
Found in: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A., Atmospherics and Robotics.
Shaft Miners have the ability to smelt more from sand and Cargo can order more.
Used for: Constructing windows and other things
Strategy: Hold in active hand and activate to start building
Description
Here's the list of things you can make with having glass/reinforced glass in your hand:

How to produce Glass:

Smelt sand at the Mining furnace, or smelt Glass shards with a Welding Tool to reform them into Glass sheets.

How to produce Reinforced Glass:

Requires
1 x Rods, 1 x Glass
 Use rods on glass

Plasteel (Reinforced Metal)

Metal r.png
Plasteel/Reinforced Metal
Found in: A stack exists in Engineering, E.V.A. and Robotics.
Shaft Miners have the ability to smelt more with iron and plasma ores.
Used for: Reinforcing walls, mechs, building an AI Core
Strategy: Hold in active hand and activate to start building
Description
Plasteel is an alloy of plasma and iron.

List of things you can make having plasteel in your hand and activating it:

How to produce Plasteel:

Smelt a combination of iron ore and plasma ore at the Mining furnace.

Rods

Rods.png
Rods
Found in: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A..
More can be made from Metal sheets.
Used for: Constructing grilles and reinforcing
Strategy: Hold in active hand and use it on things
Description
Here's the list of things you can make with having rods in your active hand:
  • Grille (By clicking in your hand)
  • Lattice (For floors, by clicking on the tile)
  • Reinforcing tables
  • Reinforcing floors (By clicking on the tile)
  • Reinforcing normal glass into reinforced glass. (Have rods in hand while clicking glass sheet)
  • Can be turned back into metal sheets by being welded with a Welding Tool

How to produce Rods:

Requires
1 x Metal
 Use metal and click "2x metal rods" (makes two sets of rods)

Floor Tiles

Floor Tiles.png
Floor Tiles
Found in: Ready stacks can be found nowhere, can be made from metal or removed from the floor with a crowbar
Used for: Constructing Plating or Steel Floor
Strategy: Hold in active hand and use it on lattices or a floor without plating
Description

How to produce Floor Tiles:

Requires
1 x Metal
 Use metal and click "4x floor tiles" (makes 4 floor tiles)

Planks

Planks.png
Planks
Found in: Ready stacks can be found nowhere, can be made from deconstructing
tables or growing Tower Caps and cutting them up with a hatchet.
Used for: Constructing various things from sandals and coffins to decorations
Strategy: Hold in active hand and activate it to start constructing
Description
List of things you get when activated in hand:
  • Wooden Sandals (1 plank)
  • Table parts (2 planks)
  • Wood floor tile 4x (1 plank)
  • Wooden chair (3 planks)
  • Wooden barricade (5 planks)
  • Wooden door (10 planks)
  • Coffin (5 planks)
  • Bookcase (5 planks)

Lattice.png Lattice

Requires
1 x Rods
The basic base for all types of construction, this is placed directly in space.
Place by having rods in your hand, and clicking on a empty space tile.

Lattice deconstruction:

INFO NEEDED

Plating.png Plating

Requires
1 x Floor tile
The basic floor which you put things like wires and pipes upon. 'All' floor is built ontop of this.
Place by having the floor tile in your hand, and click on a lattice.

Plating deconstruction:

INFO NEEDED

Floor.png Steel Floor

Requires
1 x Floor tile
This is the basic "nice" floor, this floor should be considered used in all public areas, hence why
there's none of these in maintenance tunnels.
Place by having the floor tile in your hand, and click on a Plating-tile.

NEEDS INFO HOW WOODEN FLOOR TILES, CARPETS ETC. WORK

Steel Floor deconstruction:

Requires
Crowbar
For all floors, use a crowbar on a floor tile to remove it

LightFloor.gif Light Floor

Requires
1 x Glass, 1 x Metal, 5 x Wire Coil
 Assuming there already is a plating
 Use the wire on glass
 Use the metal on the tile you get
 Place the light tile on the plating

Light Floor deconstruction:

You can further dismantle the light floor tile:
Use a crowbar on the light tile to remove the metal.
Use wirecutters on the resulting tile to separate wires from glass.

Walls

Normal Wall

This is the standard type of wall found around the station, they are easy to construct and remove but are not as strong as reinforced walls. They also come in a hidden door variety.

Object Requires Uses
Wall.png Wall Metal.pngx4
  • Keeping people out.
  • Keeping people in.
  • Keeping people from going places.
  • Stand where you want the wall.
  • Click the metal in your hand to open the construction panel.
  • Choose 'Build wall girders' from the list.
  • Use the remaining 2 sheets of metal on the girder.

Wall deconstruction:

Requires
Welder, Wrench (Or Crowbar)
 Weld off the plating.
 Wrench the girders apart.
 (Alternately, you can use a crowbar to dislodge the girder and drag it out of the way)

Reinforced Wall

This is the reinforced type of wall found in secure areas of station, they are reasonably simple to construct, but are very time consuming to remove. They also can be made as a hidden door.

Object Requires Uses
R wall.png Reinforced Wall Metal.pngx2 Metal r.pngx2
  • Keeping people in and out of high security areas.
  • Stand where you want the reinforced wall.
  • Click the metal in your hand to open the construction panel.
  • Choose 'Build wall girders' form the list.
  • Use the plasteel on the girders to reinforce them.
  • Use the last plasteel sheet on the reinforced girders to finish the wall.

Reinforced Wall deconstruction:

Requires
Welder, Wrench, Screwdriver, Wirecutters, Crowbar
 Wirecutters.
 Screwdriver.
 Welder.
 Crowbar.
 Wrench.
 Welder.
 Crowbar.
 Screwdriver.
 Wirecutters.
 Wrench.

Normal/Reinforced Hidden Door

With a little imagination, hidden doors can be used in many marvelous tactics, varying from ambushes to passages into your very own secret hideaway room.

Object Requires Uses
False Wall.gif Hidden Door
False Wall r.gif Reinforced Hidden Door
Metal.pngx4 or
Metal.pngx2 Metal r.pngx2

Also known as "Fake Walls" or "Hidden Walls".

  • Click to open.
  • An almost undetectable escape route.
  • Not airtight, leaks gases through.
  • Otherwise, same as a regular wall.
  1. Stand where you want the door.
  2. Click the metal in your hand to open the construction panel.
  3. Choose 'Build wall girder' from the list.
  4. Use crowbar on the girder and wait a few seconds for it to dislodge.
  5. Use the remaining 2 sheets of metal, or plasteel for a reinforced type, on the girder.

To turn an already finished wall into a hidden door, follow the deconstruction guide for the wall type until the final wrenching of the girder, and instead proceed from the "Use crowbar on the girder" line above.

Hidden Door (Normal or Reinforced) deconstruction:

Requires
Screwdriver,Welder, Wrench
 Screwdriver.
 Welder.
 Wrench.

Normal/Reinforced Windows

Windows can be placed in two ways: Full or One Direction. Full is basically a weaker, see-through and shoot-through wall, while One Direction is thinner, but not any weaker, and allows the square it is on to be entered from any direction, except the direction it's facing.

Object Requires Uses
Glass panel.png Glass wall.png Windows
Glass panel r.png Glass wall r.png Reinforced Windows
Glass.pngx2 or
Glass r.pngx2
  • Full: A see-through wall. Usually only used if you don't have enough for 2-4 one-directionals or the metal for a wall.
  • One Direction: Stops movement only from the way it faces.
  • Click the glass/reinforced glass in hand.
  • Select Full or One Direction from the menu.
  • Drag where you want it.
  • Right-click to rotate to the direction you want if one-directional.
  • Screwdriver it in place.
  • Continue if reinforced glass:
  • Crowbar (Pop pane in).
  • Screwdriver (Secure pane).

Window/Reinforced Window deconstruction:

Requires
Screwdriver, Wrench, Crowbar
 Screwdriver to unscrew the window from the floor.
 If normal glass: Wrench to deconstruct the window.
 If reinforced glass: Crowbar to pop the glass out.
 Screwdriver to unscrew the frame from the floor.
 Wrench to deconstruct the window.

Hitting the pane repeatedly with a weapon will smash it into a glass shard or, if reinforced glass, a glass shard and a metal rod.

Wall Mountings

File:APC.png APC

Requires
2 x Metal, 1x Cable Coil, 1x Circuitboard Power Control Module, Screwdriver, 1x Power Cell, Crowbar, Authorized ID
 Use the metal and make an APC frame.
 Use the frame on the wall you want the APC on.
 Fit it with the cable coil.
 Fit it with the Power Control Module.
 Screwdriver the electronics into place.
 Add the power cell.
 Crowbar shut. It starts ID locked, with the cover engaged and the main switch turned off.

APCs may only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints.

APC deconstruction:

Requires
Screwdriver, Wirecutters, Crowbar, Welder, Authorized ID
 Swipe Card to unlock APC. Alternatively, if the APC is broken (tilted and cracked cover),
 try using a fire extinguisher to smash off the cover, allowing access to the battery.
 Remove power cell by hand.
 Screwdriver to unsecure electronics.
 Crowbar to lift floor tile in front of APC
 Wirecutters to remove cables.
 Crowbar to remove Power Control Board.
 Welder to remover from wall.
 Wrenching the frame, that is now detached from the wall, deconstructs it to two metal sheets.

AirAlarm.png Air Alarm

Requires
2 x Metal, 1x Cable Coil, 1x Circuitboard Air Alarm Electronics, Screwdriver
 Use the metal and make an Air Alarm frame.
 Use the frame on the wall you want it on.
 Put in the Air Alarm Electronics.
 Wire it with 5 cable pieces.
 Screwdriver to close.

Air Alarm deconstruction:

Requires
Screwdriver, Wirecutters, Crowbar, Wrench
Open cover with screwdriver.
Cut all the wires using wirecutters.
Cut the remaining wires with wirecutters.
Pry out the circuit using the crowbar.
Remove the frame from the wall using the wrench.

FireAlarm.png Fire Alarm

Requires
2 x Metal, 1x Wire coil, 1x Circuitboard Fire Alarm Electronics, Screwdriver
 Use the metal and make an Air Alarm frame.
 Use the frame on the wall you want it on.
 Put in the Fire Alarm Electronics.
 Wire it with 5 cable pieces.
 Screwdriver to close.

Fire Alarm deconstruction:

Requires
Screwdriver, Wirecutters, Crowbar, Wrench
Open cover with screwdriver.
Cut the wires with wirecutters.
Pry out the circuit using the crowbar.
Remove the frame from the wall using the wrench.

Other

Grille.png Grille

Grilles are usually used in combination with directional windows. They allow gases and energy rounds to pass through them, but stop other objects. They can also be electrified for high security areas by building them on top of a live power wire.

Object Requires Uses
Grille.png Grille Rods.pngx2
  • Keeping people in or out.
  • Securing an area with electrified grilles.
  • Stand where you would like the grille to be placed.
  • Click on the stack of 2 rods with the hand you have them in.

Grille deconstruction:

Requires
Wirecutters
or
Screwdriver
 Use wirecutters to neatly cut the grille, or
 Use screwdriver to unfasten and drag it away, or
 Kick/smash it down.

File:Windoor.png Window-door (Windoor)

Requires
5 x Reinforced glass, 2x Reinforced metal, 1x Wire coil, Wrench, Screwdriver, Crowbar, 1x Circuitboard
 Click the reinforced glass pane.
 Click the "Windoor" button.
 Wrench.
 Plasteel (Optional: To create a secure windoor).
 Cable.
 Airlock Electronics.
 Crowbar.

Windoor deconstruction:

INFO NEEDED

Airlock.gif Airlock (Door)

Requires
4 x Metal, 1x Wire coil, Wrench, Screwdriver, 1x Airlock electronics, ID
Optional
1x Reinforced glass, Pen
Metal Use the metal and make an Airlock Assembly
Wrench Wrench it in place
Pen Use pen to name the Airlock (OPTIONAL)
Reinforced glass Add reinforced glass to make a glass airlock (OPTIONAL)
Wire coil Add wires
ID
Airlock electronics
Unlock the airlock electronic board with an ID
Airlock electronics Use the airlock electronic board and set the access level
Airlock electronics Add the airlock electronic board to the airlock frame.
Screwdriver Screwdriver to finish

Airlock deconstruction:

Cannot be done to an emagged airlock! RCD deconstruction must be used for that. It is possible to build a new airlock over the emagged one.

Requires
Welder, Wrench, Screwdriver, Wirecutters, Crowbar, Multitool
 Screwdriver the door.
 Use multitool and wirecutters to disable everything except the doorbolts as detailed here.
 (Doorbolts must be up for this to work.)
 Weld the door shut.
 Crowbar the electronics out (if the door is electrified, this won't work for some reason).
 Wirecut the wires out.
 Unsecure it with a wrench.
 Weld it to deconstruct to metal plates.

Computer Solar.png Computers

Requires
5 x Metal, 2x Glass, 1x Wire coil (5 pieces), Wrench, Screwdriver, 1x Circuitboard
 Use the metal to open the construction panel.
 Choose Computer frame.
 Wrench it inplace.
 Insert the Circuitboard of your selection.
 Screwdriver.
 Wires.
 Glass.
 Screwdriver to finish.

Computer deconstruction:

Requires
Welder, Wrench, Screwdriver, Wirecutters, Crowbar
 Screwdriver to detach the screen.
 Crowbar to pry off the screen.
 Wirecutters to cut the cables.
 Screwdriver to detach the circuit lid.
 Crowbar to pry out the circuitboard.
 Wrench to detach the frame.
 Welder to disassemble the frame.

Autolathe.png Machines

Their construction is detailed in the machine construction guide.

Machine deconstruction:

Requires
Screwdriver, Crowbar, Wirecutters, Wrench
 Screwdriver to open the cover.
 Crowbar to pry out the circuit.
 Wirecutters to remove the wires.
 Wrench to disassemble the frame.

Usually returns all or most components used in construction. Some components may become broken.

Security Camera.gif Security Camera

Requires
1 x Camera Assembly, 1x Wire Coil, Wrench, Welder, Screwdriver
 Place the camera assembly on the tile where'd you like the camera to be.
 Wrench it into position.
 Weld it to the wall.
 (Optional) Add any additional upgrades.
 Add wire.
 Screwdriver the camera to complete it.
 Set camera network (default is SS13).
 Set camera direction.

Camera upgrades:

  • Solid plasma for EMP-proofing.
  • Carrot for X-Ray.
  • Proximity sensor for Motion Alarm.

Security Camera deconstruction:

Requires
Crowbar Screwdriver Welder Wirecutters Wrench
Screwdriver Screwdriver the camera to open the back panel.
Wirecutters Use your wirecutter to cut all the wires (cutting the alarm wire is optional).
Welder Use your welder to unweld the camera from the wall.
Wrench Wrench the camera to unattach it from the wall.
Crowbar Crowbar the camera assembly to remove any upgrades.

Turret.PNG Turret

requires
7 x Metal, Wrench, Screwdriver, Welder, 1 x any energy-based gun (any energy-based gun) , 1 x Proximity Sensor
 Build a turret frame from metal.
 Use a wrench to secure the turret frame(it can be moved around before being secured).
 Use metal on the turret frame to build the cover.
 Use a wrench on the frame to bolt the cover.
 Add the gun.
 Add the prox sensor.
 Use a screwdriver to secure it all.
 Use more metal on the frame.
 Finally use a welder to secure the second layer of metal.

Robot Cyborg Mech Robots, Cyborgs and Mechs

Their construction is described at: Robots, Cyborgs and Mechs -pages.

Disposal Pipe Disposal Bin Disposal Outlet Disposal Pipes and Machinery

Requires
1 x Disposal Pipe or Disposal Bin or Disposal Outlet Disposal Pipe/Machine, Welder, Wrench, Crowbar
 Retrieve the pipe/machine from the Disposal Pipe Dispenser (found in Atmosia).
 Crowbar the floor tile, if exists, to access plating.
 Move pipe over plating, rotate and flip using the right-click menu.
 Wrench pipe.
 Weld pipe.

Disposal Pipe deconstruction:

Requires
Welder, Wrench
 Welder on pipe to remove its joints.
 Wrench to detach it from the plating.

Note: You can then click and drag the pipe segment onto the Disposal Pipe Dispenser to delete it.

Disposal Machinery deconstruction:

Requires
Screwdriver, Welder, Wrench
 If Disposal Bin, turn off the pump.
 Screwdriver to remove power connection.
 Welder on machine to remove its joints.
 Wrench to detach it from the plating.

AI.gif AI Core

Requires
4 x Reinforced metal, 2x Reinforced Glass, 1x Wire Coil, Wrench, Screwdriver, 1x AI Circuitboard, optional: Human brain
 0AICore.pngBuild Frame from 4 reinforced sheets 
 Wrench into place 
 1AICore.pngAdd Circuit board.
 2AICore.pngScrewdriver.
 3AICore.pngAdd wires.
 4AICore.pngAdd brain placed in an MMI (only if you want a NEW AI).
 5AICore.pngAdd reinforced glass.
 Screwdriver.

Solar panel.pngSolar tracker.png Solar Panels and Trackers

Requires
Solar Assembly, Wrench, 2 x Glass or 2 x Reinforced Glass
Optional
Tracker Electronics
Solar Assembly Place the solar assembly on where you want to construct your solar panel/tracker. To connect it to a wire you must construct it under a wire node.
Wrench Wrench the solar assembly into place.
(OPTIONAL) Tracker Electronics Add the electronics if you want to create a solar tracker.
Glass
Reinforced Glass
Finish the construction by placing glass, or reinforced glass, into the assembly frame.

Solar Panel and Tracker deconstruction:

Requires
Crowbar, Wrench
 Take out the panel with a crowbar.
 If you are deconstructing a tracker: Take out the electronics with your crowbar.
 Unwrench the leftover assembly from it's place and you will be able to move it.

File:Lightfixture.png Light Fixture

Requires
2 x Metal, 1x Wire Coil, 1x Light Tube or Light Bulb Light Tube/Bulb,Screwdriver
 Build frame from 2 metal sheets (or 1 metal sheet for small fixtures).
 Place frame on wall.
 Add wires.
 Screwdriver.
 Add light tube (or light bulb for small fixtures).

Recharge Station

INFO NEEDED HOW TO CONSTRUCT ONE. OR SHOULD THIS BE IN THE MACHINES-PAGE?

Recharge Station deconstruction:

Requires
Screwdriver, Crowbar, Wirecutters, Wrench, Authorized ID
 Unlock the charger with an ID.
 Screwdriver to open the cover.
 Wrench to dislodge the internal plating.
 Wirecutters to remove the wires.
 Crowbar to remove the components.

Usually returns all or most components used in construction. Some components may become broken.

Furniture

Chairs

Chair.png
Chair
Found in: Everywhere
Used for: Chairs are for sitting down and making the place look nice
Strategy: The only real use for chairs are to restrain people or to buckle in when the shuttle is about to take off
Description
A not-so-comfy chair. A simpler version of this is the Stool.png stool.
Object Requires Uses
Chair.png Stool.png Comfy Chair.png Office Chair.png Chair/Stool/Comfy Chair/Office Chair Metal.pngx1
  • Decoration
  • Electric Chair
  • Chair Cuffing
  • Buckling in
  • Stand where you want the chair.
  • Pick up some metal.
  • Click the metal in hand.
  • Select chair from menu.

Chair deconstruction:

Requires
Wrench
 Wrench it to transform it back into a metal sheet.

Tables/Reinforced Table

Table.png
Table
Found in: Everywhere
Used for: Tables are used to hold objects on
Strategy: Put your stuff on it, but don't put your feet on it
Description
They come in two types, standard and reinforced. They cost two metal for the standard, and can be reinforced by using four metal rods on the parts. When you build the parts to the table you can set them up by hand. Tables can be taken apart with wrenches for normal tables, and taken apart with welders then wrenches for reinforced tables.

Reinforced version: Reinforced Table Wooden: Wooden Table

Object Requires Uses
Table.pngTable or Woodtable.png Wooden Table Metal.pngx2 or Planks.pngx2
  • Decoration.
  • Tabling.
  • Ghetto Surgery.
  • Placing items on.
  • Pick up some metal (or planks)
  • Click the metal (or planks) in hand.
  • Select table parts from menu.
  • Use the table parts on themselves, on the tile you want to make the table.

Table deconstruction:

Requires
Wrench
 Wrench to disassemble the table.
Object Requires Uses
R-table.pngReinforced Table Metal.pngx2 Rods.pngx4
  • A table with added security
  • Follow the instructions above to create metal table parts
  • Use rods on table parts
  • Use the table parts on themselves on the tile you want to make the table.

Reinforced Table deconstruction:

Requires
Welder, Wrench
 Welder to weaken the table.
 Wrench to disassemble it.

Lockers

Locker.png
Locker
Found in: Nearly everywhere
Used for: Storing everything but the biggest things
Strategy: Open, fill with stuff, close, lock
Description
Lockers are among the most common and arguably the most useful of containers on the station. Nearly anything can fit inside, barring other lockers, crates, and certain especially large objects like #racks and MULEbots. Coffins count as lockers.

Besides being welded shut, some lockers can be, well, locked. Several levels of access exist, such as security-, captain-, and private-level access. These can be opened with the proper level identification card, emag item, or a few good laser blasts.

If you yourself are inside a locker you can see your surroundings. Normally you can move in any direction to exit the locker, but if the locker is locked or welded you will be unable to exit, and you cannot unweld or unlock your cell from inside - at that point if you try to move around you will instead throw yourself against the sides of the locker, making a BANG BANG sound that can be heard from several squares away. Using the Resist button will allow you to slowly open the locker.

Emergencylocker.pngJumpsuitlocker.pngMedicallocker.pngL2locker.pngL3locker.pngL4locker.png

Locker deconstruction:

Requires
Welder
 Open the locker.
 Weld the locker.

Rack

Rack.png
Rack
Found in: Armory, Engineering, Atmospherics, E.V.A., Mining Outpost and a few other places
Used for: Used for equipment storage in the station
Strategy: Place things on it for show
Description
Racks can be made with a single sheet of metal. They are flat and wide, incapable of being walked over, and is bolted together. It can hold any number of items, but it holds them stacked on top of each other like a table. They are most common in maintenance tunnels and the EVA room.

Beds

Bed.png
Bed
Found in: Dormitory, Prison Wing, Brig, Medbay, Mining Outpost and a few other places
Used for: Sleeping on or buckling people to stay in place
Strategy: Go on top of it and *sleep. To buckle someone, put them on the bed and drag their sprite on it, to release click on the bed
Description
Get your mind out of the gutter, they're for sleeping! Most station's beds come with a bedsheet, and new beds without sheets can be made with metal.
The Medbay's preferred variation of a bed is the movable Roller Bed.png Roller Bed.

Bookcase.png Bookcase

Requires
5 x Planks.png, Wrench,
 Construct a frame with 4 wooden planks.
 Wrench the frame into place.
 Add a plank to the frame to make a shelf.

Bookcase deconstruction:

Requires
Crowbar, Wrench,
 Crowbar out the shelf.
 Unsecure the frame with a wrench.
 Break apart the frame with a crowbar.

Power Wires

You cannot construct wires. They are only available from yellow toolboxes, engineering vending machines or finding the ones scattered about the station's construction- and storage-areas.

  • All wires are electrified if connected to a power net (a charged SMES battery is attached to the wire), and you will get fried if you touch them.
  • Insulated gloves negate any electrical shocks to the player.

Let's say you have the following situation to fix:

How Do I Wire?

Wires are directionally dependent on where you set them down, and will apply adjacently to each "tile" you are standing by. Wires will always face inwards to you, sort of like this:

Wire laying1.PNG

This image was made by standing in the center tile with a wire coil in hand and clicking on all 8 surrounding tiles.

In situations where you can't place a wire like this you have an alternative way. Just stand on a tile, face the direction you want it to go (ctrl+arrow key) and click the tile you're standing on.

Wire laying2.PNG

This image was made by standing on the tile, pressing ctrl + left arrow key and then clicking the tile. The cable coil was in my active hand.

If you ever make a mistake with a wire, use the wirecutters to trim them! Simple as that. Wear insulated gloves if you value your life.

Knot Wiring

Let's say you have a situation that you need to fix:

Wiring situation.png

The easiest method of wiring is knot-wiring. Also known as unsmooth or non-smooth wiring.

Fixing this is simple:

Wire 1 1.PNG -> Wire 1 2.PNG -> Wire 1 3.PNG. Done.

You just position yourself properly and click the tile to lay down wire. Make sure you click on the plating (floor) and not the already laid wire. This is because:

Wire 2 1.PNG + Wire 2 2.PNG = Wire 2 3.PNG

This might look about the same as in the previous image, however it's not. In the previous image your ending result had three pieces of wire, one going from the east to the center, one going from the north to the center and one going from the west to the center. In this situation you have two pieces of wire. One going east to west and one going north to center. The two wires don't meet in the center, because the horizontal wire is going east-west without it having a point (or knot) in the center.

Smooth Wiring

Just click on wires that are "knotted" at on end (you just need to click on the wire, not the little knotted dot). Smooth wires do not power other wires on their same tile. So make sure to apply to the source wire, or the connective tip.

To fix this situation with smooth wire you'll have to follow the steps:

Wire 1 1.PNG -> Wire 3 2.PNG -> Wire 3 3.PNG -> Wire 3 4.PNG. Done.

In this method you first lay one cable to go from one of the directions to the center (image 1). You then position yourself in another direction and click on the already laid wire piece (and not the floor!). This will make the already placed piece and the new piece combine into one smooth piece of wire (image 2). You then place another piece to go from the last remaining direction to the center (image 3) and click it from the last direction to make a 2nd smooth piece of wire (image 4).

This method often uses up more wire than dot-wiring, but it's prettier and usually preferred.

Wire-net Reset

This is Byond's attempt to "reset" the whole power net in order to deal with new/removed wires that shift the power value of a whole system. It will cause APCs to stop charging for a moment, and in huge nets it can shut down the charging of all APCs for a while.

Don't mess with wires unless you have to, it causes problems to everyone in both OOC (potential lag) and IC (power loss).

Pipes

Pipes are only constructed from Pipe Dispensers in Atmospherics. To use a Pipe Dispenser, follow these steps:

  1. Put Dispenser in a powered area.
  2. Wrench Dispenser to lock it into place.
  3. Click on the Pipe Dispenser with an empty hand and select the pipes you wish to use.
  4. You have a pipe to play with now.
  5. Wrench Dispenser to make it mobile once more.

Placing and Removing Pipes

Disposal pipe.png Disposal Pipes

  1. Rotate the pipe to the direction you wish the pipe to be in.
  2. Wrench the pipe to the ground.
  3. Use a lit welder to fuse the pipe to the ground.

Gaspipe.png Gas Pipes

  1. Rotate the pipe to the direction you wish (pay attention to gas pumps as they are direction dependent).
  2. Wrench into place.
  3. Turn on the pipe, if necessary.

How to Remove a Pipe

  1. Perform the step you used to set the pipe into place in reverse (make sure the pipe is powered off).
  2. Brace for any junk that might blast out of the pipe.