Guide to construction

If you want to do a job, like Station Engineer, you need to know how to build and deconstruct stuff.

Basic Tools

Before you can begin any construction or deconstruction you need to gather a few useful tools.

These tools can be found in any blue Mechanical Toolbox on the station. They can also be made in an Autolathe or dispensed from a YouTool -vending machine.

Crowbar Crowbar

Screwdriver Screwdriver

Welder Welder

Wirecutters Wirecutters

Wrench Wrench

Materials

To build anything, you need materials.

Metal

Metal Found in: Ready stacks in Engineering, Auxiliary Tool Storage, E.V.A., Robotics and Atmospherics. Shaft Miners have the ability to smelt more from iron ore and Cargo can order more. Used for: Constructing various things from supportive elements to decorations Strategy: Hold in active hand and activate to start building Description List of things you can make with having Metal in your hand and activating it: Stool (1 metal) Chair (1 metal) Comfy Chair (1 metal) Office Chair (1 metal) Bed (2 metal) Table parts (2 metal) Rack parts (1 metal) Closet (2 metal) Canisters (10 metal) 4x Floor tiles (1 metal) 2x Metal rods (1 metal) Computer frame (5 metal) Wall girders (2 metal) Airlock assembly (4 metal) Machine frame (5 metal) Turret frame (5 metal) APC frame (2 metal) Grenade Casing (1 metal) Iron Door (20 metal) Things you can do with it in your hand: Finish wall girders into walls. Repair broken walls. Add armor to turret frames. Refill an Exosuit Fabricator, Autolathe or Protolathe. How to produce Metal: Smelt iron ore at the Mining furnace.

Glass and Reinforced Glass

Glass and Reinforced Glass Found in: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A., Atmospherics and Robotics. Shaft Miners have the ability to smelt more from sand and Cargo can order more. Used for: Constructing windows and other things Strategy: Hold in active hand and activate to start building Description Here's the list of things you can make with having glass/reinforced glass in your hand: Glass: One Directional Glass panel Full Glass panel (2 sheets) Glass Lenses to grenade casings. Refill a Circuit Imprinter, Autolathe or Protolathe. Reinforced Glass: One Directional Reinforced Glass panel Full Glass panel (2 sheets) Part of AI Core assembling. Add windows into Airlocks. How to produce Glass: Smelt sand at the Mining furnace, or smelt Glass shards with a Welding Tool to reform them into Glass sheets. How to produce Reinforced Glass: Use rods on glass

Plasteel (Reinforced Metal)

Plasteel/Reinforced Metal Found in: A stack exists in Engineering, E.V.A. and Robotics. Shaft Miners have the ability to smelt more with iron and plasma ores. Cargo can order more, but they are very expensive. Used for: Reinforcing walls, mechs, building an AI Core Strategy: Hold in active hand and activate to start building Description Plasteel is an alloy of plasma and iron. List of things you can make having plasteel in your hand and activating it: AI core (4 metal) Reinforcing, repairing and finalizing walls How to produce Plasteel: Smelt a combination of iron ore and plasma ore at the Mining furnace.

Rods

Rods Found in: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A.. More can be made from Metal sheets. Used for: Constructing grilles and reinforcing Strategy: Hold in active hand and use it on things Description Here's the list of things you can make with having rods in your active hand: Grille (by clicking in your hand). Lattice (for floors, by clicking on a space tile). Reinforcing tables. Reinforcing plating (by clicking on the plating). Reinforcing normal glass into reinforced glass (have rods in hand while clicking glass sheet). Can be turned back into metal sheets by being welded with a Welding Tool. How to produce Rods: Use metal and click "2x metal rods" (makes two sets of rods)

Floor Tiles

Floor Tiles Found in: Ready stacks can be found nowhere, can be made from metal or removed from the floor with a crowbar Used for: Constructing Plating or Steel Floor Strategy: Hold in active hand and use it on lattices or a floor without plating Description A surprisingly effective ranged weapon. How to produce Floor Tiles: Use metal and click "4x floor tiles" (makes 4 floor tiles)

Planks

Planks Found in: Ready stacks can be found nowhere, can be made from deconstructing tables. Used for: Constructing various wooden things Strategy: Hold in active hand and activate it to start constructing Description List of things you get when activated in hand: Wooden Sandals (1 plank) Table parts (2 planks) Wood floor tile 4x (1 plank) Wooden chair (3 planks) Wooden barricade (5 planks) Wooden door (10 planks) Coffin (5 planks) Bookcase (5 planks) How to produce Planks: Grow Tower Caps and cut them up with a hatchet, or deconstruct already existing wooden tables in the Vacant Office.

Constructions

Lattice

The basic base for all types of construction, this is placed directly in space.

Lattice	Requires to build	How to build
	x1	Use the rod on an empty space tile.
How to deconstruct
Tools	Use a welder to cut the lattice into one rod.

Plating

The basic floor which you put things like wires and pipes upon. 'All' floors and walls are built on top of this.

Plating	Requires to build	How to build
	x1	Use a floor tile on a lattice.
How to deconstruct
Tools	Use a crowbar on broken plating, otherwise it does not deconstruct.
How to repair
Tools	Use a welder on broken plating to repair it.

Steel Floor

This is the basic "nice" floor, this floor should be considered used in all public areas, hence why there's none of these in maintenance tunnels.

Steel Floor	Requires to build	How to build
	x1	Use a floor tile on plating.
How to deconstruct
Tools	Use a crowbar on a floor tile to remove it. It will be destroyed if broken.

Wood Floor

This is a fancy floor, used in the library and similar places.

Wood Floor	Requires to build	How to build
	x1	Use a wood tile on plating. Wood tiles can be made of planks of wood.
How to deconstruct
Tools	Detach the tile with a screwdriver. Alternately: Destroy it with a crowbar. This will not give you a wood tile back.
or

Reinforced Floor

This is a reinforced floor, used in science and similar areas for better protection against fire or explosions.

Reinforced Floor	Requires to build	How to build
	x2	Use rods on a plating.
How to deconstruct
Tools	Use a wrench to dismantle it to two rods.

Carpeted Floor

This is a carpeted floor, used to make your office look fancy.

Carpeted Floor	Requires to build	How to build
	x1	Use a carpet floor on a plating.
How to deconstruct
Tools	Use a crowbar to pick up the carpet tile.

Light Floor

A fancy, more futuristic floor that lights up its surroundings.

Light Floor	Requires to build	How to build
	x1 x1 x5	Use the cable wire on glass. Use the metal on the tile you get. (Deconstruct the floor to plating, if needed.) Place the light tile on a plating.
How to deconstruct
Tools	Use a crowbar on the light tile to remove the metal. Use wirecutters on the resulting tile to separate wires from glass.

Walls

Normal Wall

This is the standard type of wall found around the station, they are easy to construct and remove but are not as strong as reinforced walls. They also come in a hidden door variety. Walls can also be made out of different minerals, uranium being special with emitting strong radiation around it. They're useful for:

• Keeping people out.
• Keeping people in.
• Keeping people from going places.

Wall	Requires to build	How to build
	x4	Stand where you want the wall. Click the metal in your hand to open the construction panel. Choose 'Build wall girders' from the list. Use the remaining 2 sheets of metal on the girder.
How to deconstruct
Tools	Weld off the plating. Wrench the girders apart. Alternately: Weld off the plating. Use a Crowbar to dislodge the girder and drag it out of the way.
or

Reinforced Wall

This is the reinforced type of wall found in secure areas of station, they are reasonably simple to construct, but are very time consuming to remove. They also can be made as a hidden door. They're useful for:

• Keeping people in and out of high security areas.

Reinforced Wall	Requires to build	How to build
	x2 x2	Stand where you want the reinforced wall. Click the metal in your hand to open the construction panel. Choose 'Build wall girders' form the list. Use the plasteel on the girders to reinforce them. Use the last plasteel sheet on the reinforced girders to finish the wall.
How to deconstruct
Tools	Wirecutters. Screwdriver. Welder. Crowbar. Wrench. Welder. Crowbar. Screwdriver. Wirecutters. Wrench.

Normal/Reinforced Hidden Door

Also known as "Fake Walls" or "Hidden Walls". With a little imagination, hidden doors can be used in many marvelous tactics, varying from ambushes to passages into your very own secret hideaway room.

• Click to open.
• An almost undetectable escape route.
• Not airtight, leaks gases through.
• Otherwise, same as a regular wall.

Hidden Door Reinforced Hidden Door	Requires to build	How to build
	x4 or x2 x2	Stand where you want the door. Click the metal in your hand to open the construction panel. Choose 'Build wall girder' from the list. Use crowbar on the girder and wait a few seconds for it to dislodge. Use the remaining 2 sheets of metal, or plasteel for a reinforced type, on the girder. To turn an already finished wall into a hidden door, follow the deconstruction guide for the wall type until the final wrenching of the girder, and instead proceed from the "Use crowbar on the girder" line above.
How to deconstruct
Tools	Screwdriver. Welder. Wrench.

Normal/Reinforced Windows

Windows are aesthetically quite pleasing because they are almost invisible. You can build two types of windows:

• Full: A see-through wall. Usually only used if you don't have enough for 2-4 one-directionals or the metal for a wall.

• One Direction: Stops movement only from the way it faces.

Windows Reinforced Windows	Requires to build	How to build
	x2 or x2	Click the glass/reinforced glass in hand. Select Full or One Direction from the menu. Drag where you want it. Right-click to rotate to the direction you want if one-directional. Screwdriver it in place. Continue if reinforced glass: Crowbar (Pop pane in). Screwdriver (Secure pane).
How to deconstruct
Tools	Screwdriver to unscrew the window from the floor. If normal glass: Wrench to deconstruct the window. If reinforced glass: Crowbar to pop the glass out. Screwdriver to unscrew the frame from the floor. Wrench to deconstruct the window. Hitting the pane repeatedly with a weapon will smash it into a glass shard or, if reinforced glass, a glass shard and a metal rod.

Wall Mountings

APC

Info about Area Power Controllers can be found here.

Area Power Controller APC	Requires to build	How to build
	x2 x1 Power Control Module x1 x1 x1	Use the metal and make an APC frame. Use the frame on the wall you want the APC on (may only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints). Fit it with the cable coil. Fit it with the Power Control Module. Screwdriver the electronics into place. Add the power cell. Crowbar shut. It starts ID locked, with the cover engaged and the main switch turned off.
How to deconstruct
Tools	Swipe Card to unlock APC. Alternatively, if the APC is broken (tilted and cracked cover), try using a fire extinguisher to smash off the cover, allowing access to the battery. Remove power cell by hand. Screwdriver to unsecure electronics. Crowbar to lift floor tile in front of APC Wirecutters to remove cables. Crowbar to remove Power Control Board. Welder to remover from wall. Wrenching the frame, that is now detached from the wall, deconstructs it to two metal sheets.

Air Alarm

Info about Air Alarms can be found here.

Air Alarm	Requires to build	How to build
	x2 x1 Air Alarm Electronics x1	Use the metal and make an Air Alarm frame. Use the frame on the wall you want it on. Put in the Air Alarm Electronics. Wire it with 5 cable pieces. Screwdriver to close.
How to deconstruct
Tools	Open cover with screwdriver. Cut all the wires using wirecutters. Cut the remaining wires with wirecutters. Pry out the circuit using the crowbar. Remove the frame from the wall using the wrench.

Fire Alarm

Info about Fire Alarms can be found here.

Fire Alarm	Requires to build	How to build
	x2 x1 Fire Alarm Electronics x1	Use the metal and make an Fire Alarm frame. Use the frame on the wall you want it on. Put in the Fire Alarm Electronics. Wire it with 5 cable pieces. Screwdriver to close.
How to deconstruct
Tools	Open cover with screwdriver. Cut all the wires using wirecutters. Pry out the circuit using the crowbar. Remove the frame from the wall using the wrench.

Security Camera

Electric eyes of the AI or for camera monitors to look through.

Camera upgrades:

• Solid Plasma for EMP-proofing.
• Carrot for X-ray.
• Proximity Sensor for motion alarm.

See here how to hack a Security Camera.

Security Camera	Requires to build	How to build
	x5 x1	Use the metal and make a Camera Assembly. Place the camera assembly on the tile where'd you like the camera to be. Wrench it into position. Weld it to the wall. OPTIONAL: Add any additional upgrades (plasma, carrot or prox sensor). Add wire. Screwdriver the camera to complete it. Set camera network (default is SS13). Set camera direction.
How to deconstruct
Tools	Screwdriver the camera to open the back panel. Use your wirecutter to cut all the wires (cutting the alarm wire is optional). Use your welder to unweld the camera from the wall. Wrench the camera to unattach it from the wall. Crowbar the camera assembly to remove any upgrades.

Light Fixture

Provides light for the people. Bulb fixture is much dimmer than the tube-one.

Light Fixture	Requires to build	How to build
	x2 x1 x1 or x1	Build frame from 2 metal sheets (or 1 metal sheet for small fixtures). Place frame on wall. Add wires. Screwdriver. Add light tube (or light bulb for small fixtures).
How to deconstruct
Tools	Turn off the light if needed and remove the light tube or bulb from the fixture. Screwdriver the light fixture to expose the wires. Wirecutters to cut the wires. Wrench the fixture frame to deconstruct it.

Other

Grille

Grilles are usually used in combination with directional windows. They allow gases and energy rounds to pass through them, but stop other objects. They can also be electrified for high security areas by building them on top of a live power wire.

• Keeping people in or out.
• Securing an area with electrified grilles.

Grille	Requires to build	How to build
	x2	Stand where you would like the grille to be placed. Click on the stack of 2 rods with the hand you have them in.
How to deconstruct
Tools	Use wirecutters to neatly cut the grille, or ...Use a screwdriver to unfasten and drag it away, or ...Smash it down.
or

Barricade

The poor man's barrier, not nearly as strong or cool looking. Useful for:

• Keeping people in or out, for a short while.

Wooden Barricade	Requires to build	How to build
	x5	Stand where you would like the barricade to be placed. Click on the stack of planks in your hands and choose "Wooden Barricade".
How to deconstruct
Tools	Cannot be neatly deconstructed. Just smash it with anything to get 3 planks.
Anything
How to repair
Tools	Use wooden planks to repair.

Windoor (Window-door)

Like a door, but more minimalistic.

Windoor	Requires to build	How to build
	x5 x2 x1 Airlock Electronics x1	Click the reinforced glass pane. Click the "Windoor" button. Wrench. Plasteel (Optional: To create a secure windoor). Cable. Airlock Electronics. Crowbar.
How to deconstruct
Tools	Screwdriver to remove airlock electronics. Remove wires from the assembly with wirecutters. Unanchor it by wrenching. Weld it to deconstruct the assembly into reinforced glass and rods.

Airlock

This is an airlock - it locks air. Everyone just calls them doors, although they are not actual doors. If you want to hack an airlock, see here.

Airlock	Requires to build	How to build
	x4 OPTIONAL: x1 x1 Airlock Electronics x1	Use the metal and make an Airlock Assembly. Wrench it in place. (OPTIONAL) Use Pen to name the airlock. (OPTIONAL) Add Reinforced Glass to make a glass airlock. Add Wires. Unlock the Airlock Electronics Board with an ID. Use the Airlock Electronics Board and set the access level. Add the Airlock Electronics Board to the airlock frame. Screwdriver to finish.
How to deconstruct
Tools	Cannot be done to an emagged airlock! RCD deconstruction must be used for that. It is possible to build a new airlock over the emagged one with the RCD. Screwdriver the door. Use multitool and wirecutters to disable everything except the doorbolts as detailed here. (Doorbolts must be up for this to work!) Weld the door shut. Crowbar the electronics out (if the door is electrified, this won't work for some reason). Wirecut the wires out. Unsecure it with a wrench. Weld it to deconstruct to metal plates.

Turret

To ensure no one trespasses an area. Its options are (first option is the default setting):

• Status: On/Off - wether the turret's power is on or off.
• Behaviour control are locked/unlocked - can be unlocked with a Security level ID.
  • Check for Weapon Authorization: No/Yes - neutralizes people who have a weapon out but are not Heads or Security staff.
  • Check Security Records: Yes/No - searches Security Records for criminals.
  • Neutralize Identified Criminals: Yes/No - neutralizes crew members set to Arrest on the Security Records.
  • Neutralize All Non-Security and Non-Command Personnel: No/Yes - self explanatory.
  • Neutralize All Unidentified Life Signs: Yes/No - neutralizes aliens.

Turret	Requires to build	How to build
	x7 Any energy-based gun Any energy-based gun x1 x1	Build a turret frame from metal. Use a wrench to secure the turret frame(it can be moved around before being secured). Use metal on the turret frame to build the cover. Use a wrench on the frame to bolt the cover. Add the gun. Add the prox sensor. Use a screwdriver to secure it all. Use more metal on the frame. Finally use a welder to secure the second layer of metal. (use ID and hand to unlock and change turret settings, or turn it off and use wrench to move it)
How to deconstruct
Tools	(only if the turret hasn't been finished yet, otherwise damage it and use crowbar to try salvaging some components) Crowbar Screwdriver Remove Proximity sensor by hand Remove gun by hand Wrench Weld Wrench Crowbar

AI Core

The AI's house.

AI Core	Requires to build	How to build
	x4 x2 x1 x1 Optional: x1	Build AI Core Frame from 4 reinforced sheets. Wrench into place. Add Circuit board. Screwdriver. Add wires. Add brain placed in an MMI (only if you want a NEW AI). Add reinforced glass. Screwdriver.
How to deconstruct
Tools	Crowbar to remove glass panel. Crowbar to remove brain. Wirecutters to remove cables. Screwdriver to unfasten the circuit board. Wrench to unfasten the frame. Welder to deconstruct assembly.

Solar Panels and Trackers

You can generate power with these things.

Solar Panel Solar Tracker	Requires to build	How to build
	x1 x2 or x2 Tracker: x1	Place the solar assembly on where you want to construct your solar panel/tracker. To connect it to a wire you must construct it under a wire node. Wrench the solar assembly into place. (OPTIONAL) Add the electronics if you want to create a solar tracker. or Finish the construction by placing glass, or reinforced glass, into the assembly frame.
How to deconstruct
Tools	Take out the panel with a crowbar. If you are deconstructing a tracker: Take out the electronics with your crowbar. Wrench the leftover assembly from it's place and you will be able to move it.

Disposal Pipes and Machinery

The disposal system of the station.

Disposal Pipes and Machinery	Requires to build	How to build
	x1 or x1 or x1	Retrieve the pipe/machine from the Disposal Pipe Dispenser (found in Atmosia). Crowbar the floor tile, if exists, to access plating. Move pipe over plating, rotate and flip using the right-click menu. Wrench pipe. Weld pipe.
How to deconstruct
Tools	If Disposal Bin, start here: first turn off the pump and use a screwdriver to remove power connection, and continue... If Disposal Pipe, start here: Welder it to remove its joints. Wrench to detach it from the plating. Note: You can then click and drag the pipe segment onto the Disposal Pipe Dispenser to delete it.
()

Computers

Computers can have various uses.

Computer	Requires to build	How to build
	x5 x2 x5 x1	Use the metal and make a Computer Frame. Wrench it inplace. Insert the Circuitboard of your selection. Screwdriver. Wires. Glass. Screwdriver to finish.
How to deconstruct
Tools	Screwdriver to detach the screen. Crowbar to pry off the screen. Wirecutters to cut the cables. Screwdriver to detach the circuit lid. Crowbar to pry out the circuitboard. Wrench to detach the frame. Welder to disassemble the frame.

Machines

Their construction and deconstruction is detailed in the machine construction guide.

Robots, Cyborgs and Mechs

Their construction is described at: Robots, Cyborgs and Mechs -pages.

Mineral Door

The actual doors of the game. Nobody ever uses these poor things and they aren't even airtight. Every ore material (and wood) can be made into a door. Other door types (which act otherwise similar, just made out of different material) are: sand, gold, silver, plasma, uranium and diamond.

Doors	Requires to build	How to build
	The mineral (or wood) of your choice x20	Stand where you would like the door. Use the metal and make a Door.
How to deconstruct
Tools	Wrench to unwrench it. Welder to disassemble the frame.

Furniture

Chairs

Chairs are for sitting down and making the place look nice. The only real use for chairs are to restrain people, building electric chairs or to buckle in when the shuttle is about to take off. Office chairs can also be used to move buckled people around.

Chair Stool Comfy Chair Office Chair Wooden Chair	Requires to build	How to build
	x1 or x3 or x5 or x3	Stand where you want the chair. Pick up some metal or planks. Click it in hand. Select Chair from menu.
How to deconstruct
Tools	Wrench a chair to transform it back into a metal sheet.

Tables/Reinforced Table

Tables are used to hold objects on. Put your stuff on it, but don't put your feet on it. The most common ones are standard metal one and reinforced. Tables can also be used for ghetto surgery.

Table Wooden Table Poker Table Reinforced Table	Requires to build	How to build
	x2 or x2 or x2 Grass Tilex1 or x2 x2	Pick up some metal (or planks). Activate it in hand. Select table parts from menu. (If you want a Reinforced Table: use rods on the table parts. For Poker Table: use grass tile on wooden table parts.) Stand on the tile where you want the table. Activate the table parts in hand.
How to deconstruct
Tools	(If a Reinforced Table: Welder first to weaken the table.) Wrench to disassemble it.
()

Lockers

Lockers are among the most common and arguably the most useful of containers on the station. Nearly anything can fit inside, barring other lockers, crates, and certain especially large objects like racks and MULEbots.

Besides being welded shut, some lockers can be, well, locked. Several levels of access exist, such as security-, captain-, and private-level access. These can be opened with the proper level identification card, emag item, or a few good laser blasts.

If you yourself are inside a locker, you can see your surroundings. Normally you can move in any direction to exit the locker, but if the locker is locked or welded, you will be unable to exit and you cannot unweld or unlock your cell from inside - at that point if you try to move around you will instead throw yourself against the sides of the locker, making a BANG BANG sound that can be heard from several squares away. Using the Resist button will allow you to slowly open the locker.

Coffins count as lockers.

Different types of lockers:

Locker	Requires to build	How to build
	x2	Stand where you want the locker. Activate metal in hand. Choose Locker from the list.
How to deconstruct
Tools	Open the locker. Weld the locker with a welder to disassemble it into metal.

Rack

Racks are flat and wide, incapable of being walked over, and bolted together. They can hold any number of items, but they hold them stacked on top of each other like a table. They are most common in maintenance tunnels and the EVA room.

Rack	Requires to build	How to build
	x1	Activate metal in hand. Choose Rack from the list. Stand where you want the rack. Activate Rack Parts in hand.
How to deconstruct
Tools	Use a wrench to dismantle it to some Rack Parts.

Beds

Get your mind out of the gutter, they're for sleeping! Most station's beds come with a bedsheet, and new beds without sheets can be made with metal. The Medbay's preferred variation of a bed is the movable Roller Bed, which is extremely useful for sex transporting patients.

You use a bed by going on top of it and *sleep. To buckle someone, put them on the bed and drag their sprite on it, to release click on the bed.

Bed	Requires to build	How to build
	x2	Stand where you want the bed. Activate metal in hand. Choose Bed from the list.
How to deconstruct
Tools	Use a wrench to dismantle it to two sheets of metal.

Bookcase

Holds any number of books inside.

Bookcase	Requires to build	How to build
	x5	Construct a frame with 4 wooden planks. Wrench the frame into place. Add a plank to the frame to make a shelf.
How to deconstruct
Tools	Crowbar out the shelf. Unsecure the frame with a wrench. Break apart the frame with a crowbar.

Power Wires

Power wires are only available from yellow toolboxes, engineering vending machines or scattered about the station's maintenance-, construction- and storage-areas.

• All wires are electrified if connected to a power net (a charged SMES battery is attached to the wire), and you will get fried if you touch them.
• Insulated gloves negate any electrical shocks to the player.

How Do I Wire?

Wires are directionally dependent on where you set them down, and will apply adjacently to each "tile" you are standing by. Wires will always face inwards to you, sort of like this:

This image was made by standing in the center tile with a cable coil in hand and clicking on all 8 surrounding tiles.

In situations where you can't place a wire like this you have an alternative way. Just stand on a tile, face the direction you want it to go (ctrl+arrow key) and click the tile you're standing on.

This image was made by standing on the tile, pressing ctrl + left arrow key and then clicking the tile. The cable coil was in my active hand.

If you ever make a mistake with a wire, use the wirecutters to trim them! Simple as that. Wear insulated gloves if you value your life.

Knot Wiring

Let's say you have a situation that you need to fix:

The easiest method of wiring is knot-wiring. Also known as unsmooth or non-smooth wiring.

Fixing this is simple:

→ → Done.

You just position yourself properly and click the tile to lay down wire. Make sure you click on the plating (floor) and not the already laid wire. This is because:

+ =

This might look about the same as in the previous image, however it's not. In the previous image your ending result had three pieces of wire, one going from the east to the center, one going from the north to the center and one going from the west to the center. In this situation you have two pieces of wire. One going east to west and one going north to center. The two wires don't meet in the center, because the horizontal wire is going east-west without it having a point (or knot) in the center.

Smooth Wiring

Just click on wires that are "knotted" at on end (you just need to click on the wire, not the little knotted dot). Smooth wires do not power other wires on their same tile. So make sure to apply to the source wire, or the connective tip.

To fix this situation with smooth wire you'll have to follow the steps:

→ → → Done.

In this method you first lay one cable to go from one of the directions to the center (image 1). You then position yourself in another direction and click on the already laid wire piece (and not the floor!). This will make the already placed piece and the new piece combine into one smooth piece of wire (image 2). You then place another piece to go from the last remaining direction to the center (image 3) and click it from the last direction to make a 2nd smooth piece of wire (image 4).

This method often uses up more wire than dot-wiring, but it's prettier and usually preferred.

Wiring the Solars

Easiest method: just look at the animation until you get it:

Wire-net Reset

This is Byond's attempt to "reset" the whole power net in order to deal with new/removed wires that shift the power value of a whole system. It will cause APCs to stop charging for a moment, and in huge nets it can shut down the charging of all APCs for a while.

Don't mess with wires unless you have to, it causes problems to everyone in both OOC (potential lag) and IC (power loss).

Pipes

Pipes are only constructed from Pipe Dispensers in Atmospherics. To use a Pipe Dispenser, follow these steps:

1. Put Dispenser in a powered area.
2. Wrench Dispenser to lock it into place.
3. Click on the Pipe Dispenser with an empty hand and select the pipes you wish to use.
4. You have a pipe to play with now.
5. Wrench Dispenser to make it mobile once more.

Placing and Removing Pipes

Disposal Pipes

1. Rotate the pipe to the direction you wish the pipe to be in.
2. Wrench the pipe to the ground.
3. Use a lit welder to fuse the pipe to the ground.

Gas Pipes

1. Rotate the pipe to the direction you wish (pay attention to gas pumps as they are direction dependent).
2. Wrench into place.
3. Turn on the pipe, if necessary.

How to Remove a Pipe

1. Perform the step you used to set the pipe into place in reverse (make sure the pipe is powered off).
2. Brace for any junk that might blast out of the pipe.