Guide to toxins: Difference between revisions

Jump to navigation Jump to search
No change in size ,  10:18, 15 November 2013
Changed canister back to tank so the guide makes sense.
imported>Kingofkosmos
(Switched the bomb-pics place so it won't mess up the links.)
imported>ChrisTheThird
(Changed canister back to tank so the guide makes sense.)
Line 132: Line 132:
# Secondly, you're going to need to start off by emptying the [[Plasma Tank]](s), you can do this by putting them in the [[Portable Scrubber]] and setting the kPa to 1013. Once you have emptied the tank, go and fill it up with 50 kPa of [[Plasma]], once that is done, take it to the superheated canister and fill it up to 1013 kPa.
# Secondly, you're going to need to start off by emptying the [[Plasma Tank]](s), you can do this by putting them in the [[Portable Scrubber]] and setting the kPa to 1013. Once you have emptied the tank, go and fill it up with 50 kPa of [[Plasma]], once that is done, take it to the superheated canister and fill it up to 1013 kPa.
# Thirdly, you're going to need take the [[Oxygen Tank]] and scrub it using the [[Portable Pump]], which is right beside the Portable Scrubber. Now that the tank is empty, take it to [[Toxins Storage]] and fill it up to about 903 kPa of oxygen, then take it over to the Plasma [[Canister]] and set the kPa to 1013. Doing this will fill the rest of the Oxygen Tank with plasma.
# Thirdly, you're going to need take the [[Oxygen Tank]] and scrub it using the [[Portable Pump]], which is right beside the Portable Scrubber. Now that the tank is empty, take it to [[Toxins Storage]] and fill it up to about 903 kPa of oxygen, then take it over to the Plasma [[Canister]] and set the kPa to 1013. Doing this will fill the rest of the Oxygen Tank with plasma.
# Finally, once the Plasma Canister is finished heating (when it reaches over a thousand kPa) take it out and do the normal bomb assembly procedure (combine the Oxygen Tank and Plasma Tank with a [[Tank Transfer Valve]]). Test your bomb to see if it works; you will know that you have done everything correctly if it knocks out at least one camera.
# Finally, once the [[Plasma Tank]] is finished heating (when it reaches over a thousand kPa) take it out and do the normal bomb assembly procedure (combine the Oxygen Tank and Plasma Tank with a [[Tank Transfer Valve]]). Test your bomb to see if it works; you will know that you have done everything correctly if it knocks out at least one camera.
# Remember, this bomb is pretty weak when you take into consideration how high you can go if the bomb cap is removed. This bomb normally has a damage area of around 3/6/11 (hole in space/total destruction/light destruction) whereas the cap is around 3/7/14. Roughly the highest you can go without the bomb cap is around 10/20/40 using only tank transfer valves.
# Remember, this bomb is pretty weak when you take into consideration how high you can go if the bomb cap is removed. This bomb normally has a damage area of around 3/6/11 (hole in space/total destruction/light destruction) whereas the cap is around 3/7/14. Roughly the highest you can go without the bomb cap is around 10/20/40 using only tank transfer valves.


Navigation menu