NT Script

The NT Scripting Language(NT Script, or NTSL) is a new piece of technology being pushed by NT Tech Department to standardize programming and communication of all Nanotrasen-grade electronic devices. Its syntax is a mixture of PHP, C++, and JavaScript. Most implementations of NT Script are not object-oriented and do not allow the definition of classes, instead, rely on ROBUST(tm) memory management system to store entities in a dynamic data tree. NT Script does allow the in-line definition of functions, however.

It is important to note that NT Scripting should not be treated as BYOND coding. NT Scripting handles some things differently than BYOND does.

A repository for scripts can be found here.

Simple Guide to Using Scripts

1. Get to the Telecommunications Control Room
2. Open up the Telecommunications Traffic Control Console
3. Authorize yourself access by clicking on Insert ID while holding your ID
4. [Scan] for servers
5. Click on a server which radio channel you wish to alter
6. [Edit Code] to see the server's code
7. Type your code into the window
8. Press Compile
9. Close the code window
10. Change Signal Execution to ALWAYS
11. Congratulations, you're done!
    • Repeat steps 5 to 10 for each desired channel

Syntax Guide

NT Script follows a simple-to-use syntax designed for users of all levels of programming expertise. Whitespace is ignored, semicolon break points are required, and curly brackets are required.

Variables

Variables are used to temporarily store any form of data that can be accessed somewhere else in the code. For simplicity, we'll ignore the fact that you can only use variables in children scope. Here is how you create a variable:

myVariable = 5;

You can alternatively assign the same variable a text value, or a string.

myVariable = "Hello world!";

Functions

Functions can be used and defined dynamically. There are different pre-defined functions for each NTSL implementation, however the basic ones will remain the same. Here is how you use a function:

$myVariable = getNumber();

In this example, $myVariable is assigned whatever value getNumber() returns. Each function returns a value, even if a value return is explicitly not defined. Here are some more examples of how to use functions:

broadcast($myVariable);
broadcast("Hello world!");
broadcast("Griffing assistants in T-minus " + $myVariable + " seconds.");

You can also define your own functions, using the def keyword.

def getNumber() {
    return 5;
}

Code Blocks

Blocks of code are called when a specific piece of code signals that it is a representation of a block of code. Variables defined in one code block cannot be applied or changed in other nonrelated code blocks; this is known as scope. For example:

myGlobalVariable = getNumber();

while(myGlobalVariable != 0) {
    
   myLocalVariable = 0;
   myGlobalVariable = myLocalVariable;
}

myLocalVariable = 50; // this is invalid; myLocalVariable does not exist in this scope

Once the interpreter reads the closing bracket, it destroys all variable definitions within the scope, therefore you cannot use any of the variables that existed in that particular block of code.

Lists

You can create new lists using list() and access elements using the [] operator.

my_list = list("something", "something else", "lynch the signal tech");
sig.content += my_list[1]; // adds "something"

You can also create associative lists.

my_list = list("a" = "something", "b" = "something else");
sig.content += my_list["a"]; // adds "something"

You can also use the [] operator on strings

some_string = "something";
sig.content += some_string[4]; // adds "e" since its the 4th character of "something"

Conditionals

The while() loop in the previous example is considered a conditional because it only continues executing when the condition between the parentheses is true. The != is known as a relational operator which returns true to the interpreter if myGlobalVariable does not equal 0. It can be read as "while myGlobalVariable does not equal 0, execute the following block of code".

Here is a list of all relational operators:

== : Equals
!=  : Does not equal
<  : Less than
>  : Greater than
<= : Less than or equal to
>= : Greater than or equal to

Relational operators can be used in if(), and elseif(), statements, which are used the following way:

if($myVariableNumber == 50) // if my number is 50
{
   // code block
}
elseif($myVariableNumber <= 30) // if not, is my number 30 or less?
{   
   // code block
}
else // if not either 50 OR 30 or more, do this instead
{
   // code block
}

Math

The math operators are for the most part pretty standard, the only one to watch out for is division which is not the expected / (as that would clash with comments in the naive ntsl parser)

* is multiplication

+ is addition

- is subtraction

/ is division

^ is exponentiation

NT Deluxe Namespaces

Nanotrasen will constantly add new universal functions and features to NTSL, here are a few of them:

Number

Syntax	Returns	Description
prob(number)	number	Returns nonzero is the probability succeeded. Returns zero if the probability failed.
sqrt(number)	number	Returns the square root of Arg.1.
abs(number)	number	Returns the magnitude of Arg.1.
floor(number)	number	Returns the Arg.1 rounded down to nearest integer.
ceil(number)	number	Returns the Arg.1 rounded up to nearest integer.
round(number)	number	Returns the Arg.1 rounded to nearest integer. 1.5 becomes 2, 1.49 becomes 1.
clamp(number, number, number)	number	Clamps Arg.1 between min(Arg.2) and max(Arg.3). clamp(30, -30, 25) = 25
inrange(number, number, number)	number	Returns 1 if Arg.1 is inbetween min(Arg.2) and max(Arg.3).
min(...)	number	Returns the smallest value of all arguments.
max(...)	number	Returns the largest value of all arguments.
tostring(number)	string	Returns a sting value of the number.
rand(number, number)	number	Returns a random integer that is inbetween min(Arg.1) and max(Arg.2).
rand(number)	number	Returns a random integer that is inbetween 0 and max(Arg.1).
rand()	number	Returns a random float that is inbetween 0 and 1.
randseed(number)		Resets the RNG with this value.
sin(value)	number	Returns the sine of the value.
cos(value)	number	Returns the cosine of the value.
asin(value)	number	Returns the arcsine of the value.
acos(value)	number	Returns the arcossine of the value.
log(value)	number	Returns the logarithm of the value.

String

A string is a sequence of characters. A string is defined by two quote marks.
"Hello world!" is a string.
A strings length is the amount of letters and blankspaces it contains.

Syntax	Returns	Description
find(string, string)	number	Returns the position of the first occurrence of Arg.2 in Arg.1 or 0 if no matches were found.
length(string)	number	Returns the length of the string.
substr(string, number, number)	string	Returns a substring from Arg.1 based on start (Arg.2) to end (Arg.3).
replace(string, string, string)	string	Returns a instance of the string (Arg.1) where all occurences of Arg.2 are replaced by Arg.3.
lower(string)	string	Converts the string to lowercase.
upper(string)	string	Converts the string to uppercase.
proper(string)	string	Converts the first character to uppercase, rest to lowercase.
explode(string, string)	list	This will split the string(Arg.1) at every place that matches the separator(Arg.2) in to a list. explode("Hello there young friend", " "), will produce a list with 4 indices, "Hello", "there", "young", "friend". This is very useful for chat commands: if(at(explode($content, " "),1)=="/bot"){dostuff} will make dostuff only run if the first word was /bot.
repeat(string, number)	string	Repeats the string n(Arg.2) amount of times.
reverse(string)	string	Reverses the string.
tonum(string)	number	Converts the string in to a number.

List

Vectors are resizeable data containers for storing any form of entities inside. They are very useful for serving as lists; their members can be instantly accessed provided you have an appropriate position. People call them arrays in other languages. Vector indexes in NTSL start at 1, unlike in other languages where arrays are usually zero-indexed.

Syntax	Returns	Description
list(...)	list	Returns a listwith a given number of entities. You can add an infinite number of entries, or no entries at all.
my_list.Copy(number, number)	list	Returns a new list based on my_list, ranging from minimum index Arg.1 to Arg.2.
my_list.Add(...)		Adds Arg.1 (and every item after) to the end of the list. Deprecated by the += operator.
my_list.Remove(...)		Loops through the list and deletes the items matching the Args.
my_list.Cut(number, number)		Cuts out entries from Arg.1 to Arg.2 in my_list.
my_list.Swap(number, number)		Swaps the entries's position at Arg.1 and Arg.2 in my_list.
my_list.Insert(number, var)		Inserts Arg.2 into my_list at index Arg.1.
my_list.Find(list, var)	var	Searches my_list for Arg.1, returns 0 if not found.
length(list)	number	Returns the length of the list. (amount of indices)
my_list.Join(string)	string	This will join the my_list in a string separating the indices with the separator(Arg.1) and returns that string.

Miscellaneous Definitions

Syntax	Returns	Description
pick(...)	var	Returns a randomly-selected entry from the parameters. Note: list parameters will add their entries into the "raffle". The function will never return a list.
time()	number	Returns the real time of the server as a number. Time is in deciseconds, to convert into seconds divide by 10. You can then use this to see how much time has passed since the code has last been run via mem().
timestamp(format)	string	Returns a string of the time, formatted by the parameter. E.g: "DDD MMM DD hh:mm:ss YYYY" or "hh:mm:ss" or "DD MM YY".

Prefab Variables

PI = 3.141592653;
E = 2.718281828;
SQURT2 = 1.414213562;
FALSE = 0; // true/false are just Boolean shortcuts to 0 and 1
TRUE = 1;
NORTH = 1;
SOUTH = 2;
EAST = 4;
WEST = 8;

channels.common = 1459
channels.science = 1351
channels.command = 1353
channels.medical = 1355
channels.engineering = 1357
channels.security = 1359
channels.supply = 1347
channels.service = 1349

languages.human = 1
languages.monkey = 2
languages.robot = 4
languages.polysmorph = 8
languages.draconic = 16
languages.beachtongue = 32
 
filter_types.robot = "robot"
filter_types.loud = "yell"
filter_types.emphasis = "italics"
filter_types.wacky = "sans"
filter_types.commanding = "command_headset"

Traffic Control Systems Implementation

The Telecommunications system is directly tied to the TCS scripting implementation. It comes with the following functions and features.

Realtime signal modification

If the code is set to execute automatically, signals will first execute the process_signal function.

def process_signal(sig) {
  sig.content += " HONK";
  return sig; // not returning anything will cause the signal to not be broadcast.
}

Signal information is stored in the following variables:

sig.source   // the source of the signal
sig.uuid     // the name of the person the AI will track if it tries to trace the transmission
sig.content  // the content of the signal
sig.freq     // the frequency of the signal
sig.job      // the job (only for radio messages) of the operator
sig.language // the language of the signal. Can be any of HUMAN, MONKEY, ALIEN, ROBOT, SLIME or DRONE. Or a combination of them
sig.filters  // The voice filter of the signal. Includes bolding, italics, as well as silicon and wacky fonts. These must be given as a list!
sig.pass     // Whether the signal will be broadcasted. Is a boolean, set to 0 to stop the signal from passing.
sig.say      // The verb used in a radio messages ending in "."
sig.ask	   // The verb used in messages ending in "?". Example: COMMON SERVER asks, "Why?"
sig.exclaim  // The verb used in a radio messages ending in "!" Note that having more exclamation points changes it to "$yell".
sig.yell	   // The verb used in a radio messages ending in "!!" or more exclamation points. By default, these messages are bolded.

Functions

TCS also comes with the following functions (parameters may be ignored for automatic assignment):

signal()

signal(message, frequency, source, job)

Creates a signal with the following parameters.

message: The radio message
frequency: The frequency to broadcast to
source: The name of the broadcaster. If the source name is not in a server-side voice databank (voice analysis is performed every time a person speaks over a channel) the name will appear in UPPERCASE and Italicized to indicate a synthesized voice job
job: The job of the orator.

Examples:

sig = signal("Hello world!");

defaults:
frequency: 1459
source: the server name
job: None

broadcast(signal("HELP GRIEFF", 1459, "Burer", "Security Officer"));

broadcast()

broadcast(sig)

Broadcast a signal, created using the signal() function

remote_signal()

remote_signal(frequency, code)

Sends a signal to the frequency, with the code. This works exactly like a remote signaler.

frequency: The frequency to send to.
code: The code to attach to the signal.

Examples:

remote_signal(1359, 25);

defaults:
frequency: 1459
code: 30

mem()

mem(key, value)

Variables declared in a script expire after the script has finished executing (duh). The mem function allows you to save persistent information to the server's memory to be retrieved by future executions of the script. Each telecommunications server contains its own separate databank, which is basically a hash table/dictionary, a data structure consisting of a set of key-value pairs. When called with just the key as an argument, mem will return the associated value. When called with two arguments, mem will set the value associated with the key.

key: A string used to identify the variable to be saved.
value: The information you want to store for future use. Can be any type.

Examples:

sig.source = "Jarsh Mellow";
mem(sig.source + "'s Mom");  // returns the value associated with the key "Jarsh Mellow's Mom". Returns null/0 if not found
mem(sig.source + "'s Mom", "Lindsay Donk"); // sets the value associated with the key "Jarsh Mellow's Mom" to "Lindsay Donk".

Examples

Here are a few examples. You can find more useful snippets here.

Chat calculator

A simple chat calculator.
Type "/calc 1+1" in chat and watch the magic happen. NB: division is not implemented due to budget cuts.

def process_signal(sig) {
	$expld1 = explode(sig.content, " ");
	if($expld1[1] ==  "/calc")
	{
		$s = $expld1[2];
		$found = 0;
		if(find($s, "+") && $found == 0)
		{
			$expld2 = explode($s, "+");
			broadcast($s + " = " + tostring(tonum($expld2[1]) + tonum($expld2[2])), $freq, "LINDSAY", "CALCULATER");
			$found = 1;
		}
		if(find($s, "-") && $found == 0)
		{
			$expld2 = explode($s, "-");
			broadcast($s + " = " + tostring(tonum($expld2[1]) - tonum($expld2[2])), $freq, "LINDSAY", "CALCULATER");
			$found = 1;
		}
		if(find($s, "*") && $found == 0)
		{
			$expld2 = explode($s, "*");
			broadcast($s + " = " + tostring(tonum($expld2[1]) * tonum($expld2[2])), $freq, "LINDSAY", "CALCULATER");
			$found = 1;
		}
	}
	return sig;
}

Magic 8-Ball

A simple Magic 8-Ball that will answer anyone's question.
Type in "/8ball <your question>" and you will get a magical response!

def process_signal(sig) {
	$explodeString = explode(sig.content, " ");
	if($explodeString[1] ==  "/8ball")
	{
		//By Giacomand
		$8ball = pick("It is certain", "It is decidedly so", "Without a doubt", "Yes – definitely",
		"You may rely on it", "As I see it, yes", "Most likely", "Outlook good", "Yes", "Signs point to yes",
		"Reply hazy, try again","Ask again later","Better not tell you now","Cannot predict now","Concentrate and ask again","Don't count on it","My reply is no",
		"My sources say no","Outlook not so good","Very doubtful");
		$content = substr(sig.content, 7, length($content)+1);
		broadcast(signal("Magic 8-Ball... " + $content, $freq, $source, $job));
		broadcast(signal($8ball + ".", $common, "Magic 8-Ball", "Magic 8-Ball"));
		return null;
	}
	return sig;
}