Guide to toxins: Difference between revisions

Welcome to a guide to toxins, this is not a guide made by a professional but by someone willing to remake a year out of date guide.  If you do not know, Toxins is the place in science that makes bombs and or maxcaps by using a burn chamber to heat [[Plasma]] and or [[Tritium]]. In this guide, we will be making a [[Tritium]] maxcap. This guide will be in boxstation, so some intuition may be needed on other stations.

Essentially, this setup allows much of the gases to go in all at once for a better burn and while the output dumps as much as it can into the [[Tritium]] [[Canister]].

Once the mixer is setup grab a plasma [[Canister]], wrench it on to the northmost connector, grab an oxygen [[Canister]], wrench it onto the middle connector, and grab an empty [[Canister]] and of course, wrench it onto the southmost connecter.

''Fun Fact: You can relabel the colour and name of the [[Canister]] but pressing the ‘relabel’ function in their menu, this means that you can keep track of which [[Canister]] has what gas and also that any [[Canister]] can have any gas.''

Assuming you connected all the canisters in the right positions, you are now putting a mix of gasses into the caution [[Canister]]. The actual mix is 4% [[Plasma]] and 96% [[Oxygen]], and it is impossible to explain why and what this will do as the atmospherics code is based on nearly two decades of spaghetti and duct tape.  

None the less, we will need three full canisters of this mix which will also require more [[Oxygen]] canisters as well. The actual max limit of what a [[Canister]]can handle is infinite, but for our intents, they can only go up to 4500kPa; it is not necessary to reach this limit but as close as you can. Do note that you can use empty oxygen canisters and fill them with a mix as well.

Once three mix canisters have been filled, grab an empty [[Canister]] and set it to the end of the output pipe, it’s also best to relabel it to a [[Tritium]] [[Canister]] though it is not necessary. Once the [[Tritium]] [[Canister]] is in place, check to make sure that the southern manual valve is closed and wrench the mix canisters on the input pipe’s connectors.

''If you’re not curious about what’s happening, skip this paragraph.''<br>For those who remain, it is worth noting that as in real life, most things require [[Oxygen]] to explode and burn. As you might imagine plasma is no different, but what is interesting to note is that the plasma burning is creating H3 or [[Tritium]], which is great for fusion energy both in the game and in real life. Once the [[Tritium]] is formed the scrubber is automatically and selectively siphoning it out and into the output pipe and since the [[Tritium]] was made by burning [[Plasma]] it’s already hot.<br>

Once this burn is completed you should be able to scan the [[Tritium]] [[Canister]] and get ~22mols or ~2200kPa (Some of that may be water vapour). This is enough to make a few bombs.  

First, take an [[Oxygen]] tank from the tank dispenser and go to your likely last full oxygen [[Canister]]. Take the [[Oxygen]] tank and put it in the [[Canister]], open the canisters menu, set the pressure to the max, open the valve, wait for the [[Oxygen]] tank to fill, close the valve, and eject your now full [[Oxygen]] tank.  

Next, take a plasma tank and fill it up with [[Tritium]] just like you did with the oxygen tank, and yes, we do want the plasma that is already in the plasma tank.  

# Add the [[Oxygen]] tank and [[Plasma]]/[[Tritium]] tank to the tank transfer valve<br>