Singularity Engine: Difference between revisions

Singularity Engine (view source)

Revision as of 20:41, 11 September 2019

4 bytes added , 20:41, 11 September 2019

rearranged set up order

Missatessatessy

System Operators, Wiki Staff

839

edits

@@ Line 20: / Line 20: @@
 Late on schedule and the station is out of power? [[#In_Case_of_No_Power|See here]]. If it's a normal day on the job, continue downwards.
 === Inside Engineering: ===
-==== 1. Load the Radiation Collectors <span style="color:red">(Vital!)</span>====
+==== 1. Set up the Particle Accelerator <span style="color:red">(Vital!)</span>====
+[[File:ParticleAccelerator.gif]]
+Now it's time to set up the [[Particle Accelerator]] itself. First, wrench each piece in place. Second, wire all the pieces with a cable coil. Finally, use a screwdriver to close all the panels. Click on the console and hit "Scan for parts" to link the console with the actual PA. This is your Particle Accelerator set up!
+'''DO NOT turn the Particle Accelerator on''' yet or you will release the singularity, tearing up the entire station if you're unlucky.
+=== Outside Engineering (Spaceproof Equipment Required): ===
+==== 2. Load the Radiation Collectors <span style="color:red">(Vital!)</span>====
 [[File:Radiation_Collector.gif]]
-The [[Radiation Collector]]s are located next to the Containment Area, three on each side. [[Plasma Tank]]s may be found in the [[Tank Storage Unit]] in the [[Power Storage Room]] or in [[Atmospherics|Atmospherics' Office]]. Move the collectors into place at the end of the wires either side of the containment field and wrench them down. Place one [[Plasma Tank]] in each collector array and then TURN THE ARRAYS ON BY CLICKING ON THEM with an empty hand. Do this for all six collectors, and you should be ready to continue.
+The [[Radiation Collector]]s are located next to the containment field, three on each side. [[Plasma Tank]]s may be found in the [[Tank Storage Unit]] in the [[Power Storage Room]] or in [[Atmospherics|Atmospherics' Office]]. Move the collectors into place at the end of the wires at either side of the containment field and wrench them down. Place one [[Plasma Tank]] in each collector array and then TURN THE ARRAYS ON BY CLICKING ON THEM with an empty hand. Do this for all six collectors, and you should be ready to continue.
 '''<span style="color:blue">(Optional)</span>:'''
@@ Line 33: / Line 41: @@
 '''<span style="color:red">NOTE:</span>''' While filling your plasma tanks, it is VITAL that you DO NOT open the valve when there isn't a tank attached and that you MAKE SURE TO CLOSE the valve before removing the tank. If you fail to do either of these, you will flood the room with [[plasma]] almost immediately and become the laughingstock of the crew.
-==== 2. Set up the Particle Accelerator <span style="color:red">(Vital!)</span>====
-[[File:ParticleAccelerator.gif]]
-Now it's time to set up the [[Particle Accelerator]] itself. First, wrench each piece in place. Second, wire all the pieces with a cable coil. Finally, use a screwdriver to close all the panels. Click on the console and hit "Scan for parts" to link the console with the actual PA. This is your Particle Accelerator set up!
-'''DO NOT turn the Particle Accelerator on''' yet or you will release the singularity, tearing up the entire station if you're unlucky.
-=== Outside Engineering (Spaceproof Equipment Required): ===
 ==== 3. Wrench down loose parts <span style="color:red">(Vital!)</span>====
 [[File:Grounding_rod.gif]][[File:Tesla_coil.gif]]