Guide to Setting Up the Singularity: Difference between revisions

Line 325: Line 325:


== Maintaining the Particle Accelerator ==
== Maintaining the Particle Accelerator ==
Usually, you'll notice that something is wrong with containment before you notice something is wrong with the PA. Here are a few items to follow up with. Make sure to wear a Radiation Hood, a Radiation Suit, and Optical Meson Scanners before entering the PA Room.
: '''The singlo is fricking huge!''' Turn off the PA for a bit to power down the singlo, checking its size periodically. Also, check to see if the PA's power level was higher than 0. This is almost always the culprit.
: '''The singlo is fricking small!''' Increase the PA power level to 2 and wait until the singlo is back to Level 3 size. Then return the PA power level to 0, like you just set up the singlo before.
: '''The singlo is fricking gone!''' Turn off the PA. You'll either have to set up a new singularity generator or evacuate the station.
: '''The singlo is big, then small, then big, then small, then...''' Let me cut you off there. This is normal behavior for the singlo and should be ignored so long as it's not larger than Level 3.


= Singularity Pro-Tips =
= Singularity Pro-Tips =