Singularity Engine: Difference between revisions
→Additional Modifications (Optional/Dangerous): added PA hacking info
imported>Phil235 (adding the guide to singularity engine) |
imported>Peoplearestrange (→Additional Modifications (Optional/Dangerous): added PA hacking info) |
||
| Line 129: | Line 129: | ||
If you added the maximum amount of plasma to the collectors, this modification can generate ~6,000kW of power for the station. Enough to charge the 3 Engineering SMES and the 4 Solar SMES at 200kW input. Therefore, run a tiny bit of wire from the maintenance tunnels to each solar SMES, and set them each of them to an input/output of 90,000/30,000. This will ensure massive amounts of power reserves (enough to last hours with the engine off). | If you added the maximum amount of plasma to the collectors, this modification can generate ~6,000kW of power for the station. Enough to charge the 3 Engineering SMES and the 4 Solar SMES at 200kW input. Therefore, run a tiny bit of wire from the maintenance tunnels to each solar SMES, and set them each of them to an input/output of 90,000/30,000. This will ensure massive amounts of power reserves (enough to last hours with the engine off). | ||
---- | |||
Its also possible to hack the PA controller computer you can do a number of things with this. To access the wiring: | |||
* When the PA is setup use a screwdriver on the console | |||
* Click on the console with an empty hand to access the wiring | |||
* Different wires have different effects but the most useful wires can do the following: | |||
** Lock the PA power to 0 | |||
** A pulse on the correct wire will toggle the power (useful for a remote signaller to shut down the PA if its going critical) | |||
* Other wires will disconnect the console from the PA (meaning controls do nothing) or increase the PA power on pulsing (useful if your a traitor) | |||
* Once you've done your hacking close the panel using a screwdriver and then '''DON'T FORGET TO USE THE CONSOLE AND RE-SCAN FOR THE PARTS'''. Otherwise it'll remain inactive and will be simply off like during setup. | |||
== Video Guide (Oct 2012) == | == Video Guide (Oct 2012) == | ||